•   Celebrating Over 15 Years
  • About us
  • (0)
  •   Cart(0)
Audio Technica AT-OC9XSL

Audio Technica Dual Moving Coil Cartridge - AT-OC9XSL



Authorized Dealer Price Match Guarantee
Price Match Guarantee
Audiosource offers a price match guarantee for lower priced items on identical in-stock items from competing authorized dealers. Exclusions Apply*.


Our Price $1,049.00 CAD
Sale Ends : February 28, 2025
On Sale
Availability
Schedule Delivery

Literature

The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response
  • A neodymium magnet and permendur yoke provide dramatically increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Specifications
Wire Used for CoilPCOCC
Weight7.6 g (0.3 oz)
TypeDual Moving Coil
Terminal PinsBrass
Stylus SizeNude rectangular shank
Stylus Curvature Radius1.5 x 0.28 mil
Mounting FeatureHalf-inch mount
ModelAT-OC9XSL
Body MaterialAluminum
Accessories IncludedNon-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Dimensions17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Cartridge Weight7.6 g
MountingHalf-inch
Dynamic Compliance18 x 10-6 cm/dyne (100 Hz)
Static Compliance22 x 10-6 cm/dyne
Cantilever0.28 mm diameter nude boron
Stylus ShapeSpecial Line Contact
Output Channel Balance0.5 dB (1 kHz)
Output Voltage 0.4 mV (at 1 kHz, 5 cm/sec)
Coil Inductance25 mH (1 kHz)
DC Resistance12 ohms
Coil Impedance12 ohms (1 kHz)
Recommended Load ImpedanceMin. 100 ohms (when head amplifier is connected)
Stylus ConstructionNude rectangular shank
Vertical Tracking Force1.8-2.2 g (2.0 g standard)
Vertical Tracking Angle20°
Channel Separation 28 dB (1 kHz)
Frequency Response20-50,000 Hz



Products added for enquiry