•   Celebrating Over 15 Years
  • About us
  • (0)
  •   Cart(0)
Audio Technica AT-OC9XSH

Audio Technica Dual Moving Coil Cartridge With Shibata Stylus - AT-OC9XSH



Authorized Dealer Price Match Guarantee
Price Match Guarantee
Audiosource offers a price match guarantee for lower priced items on identical in-stock items from competing authorized dealers. Exclusions Apply*.


Our Price $949.00 CAD
Sale Ends : February 28, 2025
On Sale
Availability
Schedule Delivery

Literature

The AT-OC9XSH Dual Moving Coil cartridge with Shibata stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that increase the magnetic energy, and the nude Shibata stylus on a boron cantilever that tracks the record groove with incredible accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features nude Shibata stylus and boron cantilever for rich full-range audio reproduction and high transient response
  • A neodymium magnet and permendur yoke provide dramatically increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Specifications
Wire Used for CoilPCOCC
Weight7.6 g (0.3 oz)
TypeDual Moving Coil
Terminal PinsBrass
Stylus SizeNude square shank
Stylus Curvature Radius2.7 x 0.26 mil
Mounting FeatureHalf-inch mount
ModelAT-OC9XSH
Body MaterialAluminum
Accessories IncludedNon-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Dimensions17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Cartridge Weight7.6 g
MountingHalf-inch
Dynamic Compliance16 x 10-6 cm/dyne (100 Hz)
Static Compliance20 x 10-6 cm/dyne
Cantilever0.28 mm diameter nude boron
Stylus ShapeShibata
Output Channel Balance1.0 dB (1 kHz)
Output Voltage 0.4 mV (at 1 kHz, 5 cm/sec)
Coil Inductance25 mH (1 kHz)
DC Resistance12 ohms
Coil Impedance12 ohms (1 kHz)
Recommended Load ImpedanceMin. 100 ohms (when head amplifier is connected)
Frequency Response20-47,000 Hz
Channel Separation27 dB (1 kHz)
Vertical Tracking Angle20°
Vertical Tracking Force1.8-2.2 g (2.0 g standard)
Stylus ConstructionNude square shank



Products added for enquiry