Ortofon Moving Coil Phono Cartridge in Shiny Black - SPU Synergy G
$3,522.00
OR
$880.50
In 4 installments with
Literature
You may also like
$14,499.00
The SPU Synergy G modernizes the classic SPU design with a number of optimizations designed for optimum compatibility and sonic purity
The SPU Synergy features a wood-based housing and has a revised generator system which allows for a maximum output of 0.5 mV, relaxing the requirement for high gain transformer or active preamplification systems.
While still making use of a highly polished Nude Elliptical stylus, the stylus tip mass has been reduced significantly, resulting in reduced VTF and higher tracking ability.
| Specifications | |
|---|---|
| Cartridge weight | 28 g |
| Coilwire material | High Purity Copper (OFC) |
| Cartridge colour | Shiny Black |
| Cartridge body material | Ground wood and resin composite |
| Recommended load impedance | 10 - 50 ohm |
| Internal impedance, DC resistance | 2 ohm |
| Tracking angle | 20°*) Typical value |
| Tracking force, recommended | 3.5 g (35 mN) |
| Tracking force range | 3.0-4.0 g (30-40 mN) |
| Stylus tip radius | r/R 8/18 µm |
| Stylus type | Nude Elliptical |
| Tracking ability at 315Hz at recommended tracking force *) | > 60 µm Compliance, dynamic, lateral - 8 µm/mN |
| Frequency response | 20-20.000 Hz ± 2 dB |
| Channel separation | 15 kHz > 15 dB |
| Channel separation | 1 kHz > 23 dB |
| Channel balance | 1 kHz < 1.5 dB |
| Output voltage | 1000 Hz, 5cm/sec. - 0.5 mV |