Price | $449.99 |
Savings | $70.00 |
Our Price |
$379.99 CAD
Sale Ends : April 30, 2025 On Sale
|
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
Overview
The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Technologies
TRANS•ana
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
DTM
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
NOMAD
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
Specifications | |
---|---|
Number of Channels | 2 |
Total Power (Sum of Rated Power) | 300 Watts |
Rated Power (RMS Continuous Power) | 100 Watts x 2 @ 4-Ohm 150 Watts x 2 @ 2-Ohm 300 Watts x 1 @ 4-Ohm Bridged |
Dynamic Power (PVC/PowerCube®) | 120 Watts x 2 @ 4-Ohms 0° Res 203 Watts x 2 @ 2-Ohms 0° Res |
Bridgeable | Yes |
Frequency Response | 20Hz-20kHz |
Input Sensitivity | 150 mV - 12 V |
Circuit Topology Class | Class A/B |
Efficiency (average) | 69% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% 2-Ohm: <1.0% |
Signal Input | Hi/Low Level: 1 RCA Pair |
Signal Output | Low Level: 1 RCA Pair |
Tone Controls | 0dB to +14dB @ 12.5kHz 0dB to +18dB @ 45Hz |
Crossover Controls | High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth All-Pass: Yes |
Remote Controls | Optional Punch Level Control (PLC2) Ready |
Visual Indicators | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
Power Wire Gauge | 8 AWG to 4 AWG |
Power Input Connector | Captive C-Clamp |
Speaker Wire Gauge | 8 AWG to 18 AWG |
Speaker Output Connector | Captive C-Clamp |
Cooling | Convection |
Operating Voltage | 9 - 16 VDC |
Recommended Fuse (not included) | 50 A |
Average Current Draw (13.8V Music) | 23 A |
Max. Current Draw (13.8V Sinewave) | 45 A |
Suggested Alternator | 75 A |
Dimensions (H x W x D) | 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm) |
Shipping Weight | 9.5 Lbs. (4.3 Kg.) |